and 5 others joined a min ago.
0
1.3kviews
CNC Lathe Program
1 Answer
0
13views
written 5.3 years ago by
teamques10
★ 68k
|
| Program | Description |
|---|---|
| N010 G28 V0 W0; | Return to Home zero |
| N020 G95 G21; | Per Revolution Feed, Metric Mode |
(Facing operation)
| Program | Description |
|---|---|
| N030 M42 T0101; | High Gear, Turned No.1, Tool offset value from register 1 |
| N040 S200 M03 M07; | spindle speed, clockwise ON, coolant ON |
| N050 G00 X0 Z5; | Rapid to point 1 |
| N060 G01 Z0 F0.5; | Facing operation begins at point 2 |
| N070 X72; | Facing ends at point 3 |
| N080 G00 Z25; | Rapid withdraw of tool to point 4 |
(Turning)
| Program | Description |
|---|---|
| N090 G71 U2 R1; | stock Removal, depth of cut=2mm, Escape=1mm |
| N100 G71 P110 Q190 U2 W0 F0.5; | stock Removal |
| N110 G00 X0 Z6; | Rapid to 5 |
| N120 G01 Z0; | Turning begins from point 6 |
| N130 G03 X20 Z-10 R10; | Turn till point 7 |
| N140 G01 Z-35; | Turn till point 8 |
| N150 X40 Z-70; | Turn till point 9 |
| N160 Z-95; | Turn till point 10 |
| N170 G02 X70 Z-110 R15; | Turn till point 11 |
| N170 G01 Z-150; | Turn till point 12 |
| N190 G00 X72 Z5; | Rapid retrieval to 4 |
(Finishing Tool)
| Program | Description |
|---|---|
| N200 M42 T0202; | High Gear, Turret No.2, Tool Offset value from register 02 |
| N210 G70 P110 Q190; | Finish Turn |
| N220 G28 U0 W0 M09; | Return to Home zero, coolant OFF |
| N230 M05; | spindle OFF |
| N240 M30; | End of program , machine stop |
ADD COMMENT
EDIT
Please log in to add an answer.