written 5.9 years ago by
yashshah
• 140
|
•
modified 5.9 years ago
|
- Concrete lining is one of the most conventional type of lining which
has successfully been used in India and other parts of the world.
- After excavating the tunnel, it is required to be lined with
concrete.
- The lining is done in two or three parts.i.e overt, invert and kerb.
- For lining of overt of the tunnel, travelling type of shutter forms
of suitable length are used.
- In tunnels to be used for water, concrete lining is done to prevent
seepage of water.
- For tunnels to be used in traffic, concreting is done in portions
where rock formation needs additional support.
- Cement concrete lining eliminates weed growth and thereby improves
flow characteristics.
- Provision of concrete lining reduces maintenance charges to a
minimum.
- Cement concrete lining without reinforcement may be damaged due to
excessive external water pressure.
- The reinforced concrete lining can withstand the external water
pressure but at a very high cost.
- When unexpected water pressures are encountered, un-reinforced lining
will crack more easily than the reinforced lining and will relieve
the pressure thereby reducing the area of damage.
Tunnel concreting includes:
- Placing of reinforcement
- Fixing of formwork
- Supplying mixed concrete to the place of use in tunnel.
- Placing the concrete and compacting it after placement.
- Reinforcement steel is bend to the required shape in the bending workshop and transported to the tunnel in sections and then assembled inside the tunnel.
- Steel ribs, bars etc are used for thick concrete lining.
- Form-work for the tunnel is made up of steel or wood or combination of both.
- The form should be designed so as to resist the pressure of the concrete during its placement.
- Concrete mix is produced in the mixing plant outside the tunnel and transported in transit mixtures, agitator mixers or dump trucks to the tunnel concreting site.
- The forms are placed and fixed in position and then the concrete is forced into the form-work by using concrete pump or pneumatic concrete placer.