Write a part a program using G and M codes for finishing a forged component as shown in figure 1 Assume the speed and feed on the turning center as 500 rpm and 0.3 mm/rev respectively.

5.0kviews

written 6.1 years ago by

teamques10 ★ 68k

• modified 2.8 years ago

Assume suitable data if necessary or CNC Program.

enter image description here

Mumbai university > mechanical engineering > sem 7 > cad/cam/cae

Marks: 10M

Year: May 2015

Difficulty: Medium

cad cam cae

ADD COMMENT EDIT

1 Answer