1

10kviews

List & describe SNMP command with syntax?

written 6.8 years ago by teamques10 ★ 68k

•   modified 6.6 years ago

Subject: Telecom Network Management

Topic: Internet Management(SNMP)

Difficulty: medium

telecom network management

ADD COMMENT FOLLOW SHARE EDIT

2 Answers

2

297views

written 6.6 years ago by teamques10 ★ 68k

Command	Syntax	Explanation
DISABLE SNMP	disable snmp	Enter this command to disable SNMP and all SNMP related commands. Be default, SNMP is disabled.
ENABLE SNMP	enable snmp	Enter this command to enable SNMP and all SNMP related commands. By default, SNMP is disabled.
SET SNMP TRAPCOMMUNITY	set snmp trapcommunity {<"Trap community string">}	Enter this command to set the trap community string. By default, the value is “COMPAQ”.
SET SNMP TRAPDEST	set snmp trapdest {,1 / 2 / 3 } {[none] / []}	Enter this command to set up to three SNMP trap destinations. Trap destinations cannot be FQDN addresses, you must use IPv4 addresses only. Specify none to remove a trap destination..
SHOW SNMP	show snmp	Enter this command to show all SNMP configuration settings.
TEST SNMP	test snmp	Enter this command to send a test trap to all of the configured trap destinations. The command sends a standard test trap (11003) for the test. See SNMP trap codes and descriptions for a list of the SNMP trap codes and descriptions.

ADD COMMENT SHARE EDIT